Chapter 31 Flash Memory Controller (FMC)
31.6 Initialization and application information
The FMC does not require user initialization. Flash acceleration features are enabled by
default.
The FMC has no visibility into flash memory erase and program cycles because the Flash
Memory module manages them directly. As a result, if an application is executing flash
memory commands, the FMC's cache might need to be disabled and/or flushed to prevent
the possibility of returning stale data. Use the PFB0CR[CINV_WAY] field to invalidate
the cache in this manner.
KV4x Reference Manual, Rev. 2, 02/2015
Preliminary
Freescale Semiconductor, Inc.
605