Figure 77 - Encoder Parameters Page; Figure 78 - Encoder Specific Profile Parameters Page - Datalogic AMT58*-PN Series Instruction Manual

AMT58x-PN ProfiNET®

Figure 77 - Encoder Parameters page

Parameters listed in the Encoder Parameters page are sent by the
controller to the encoder during initialization (for further information
refer to the section "9.4 Index 0xBF00 : user parameter data" on
page 64).

Figure 78 - Encoder Specific Profile Parameters page

For further information on the parameters shown in this page refer to
the sections "9.2 Index 0xB02E : supported PROFIdrive specific
parameters" and "9.3 Index 0xB02E : supported encoder specific
parameters".
115