Cover Open Rap - Xerox WORKCENTRE 3119 Service Manual

Status Indicator RAPs

12 Cover Open RAP

Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
The Cover Open message is displayed when the front cover is closed.
The Cover Open message is not displayed when the front cover is open.
Check and Cause
1. The tab on the front cover may be dam-
aged or broken.
2. The Cover Open Switch may be stuck or
faulty.
Note: There are two Cover Open Switches.
One is fitted on the Cover-M-Side R, PL 2 and
the other is mounted on the SMPS/HVPS, PL
1.
2-16
WARNING
1. Install a new front cover, PL 2.
2. Check the cover open switch mounted on
the HVPS/SMPS using Engine Test Mode,
GP 4.
Check the connection between the cover
open switch, PL 2 and the SMPS/HVPS, PL
1.
Install new parts as necessary:
• Cover open switch, PL 2
• SMPS/HVPS, PL 1
07/06
Solution
WorkCentre 3119