Functions Specific To Scalance; Wbm; The "Show" Commands - Siemens SIMATIC NET Configuration Manual

Functions specific to SCALANCE

This part contains the sections that describe functions specific to SCALANCE.
Note
Availability of the iFeatures
The iPCF function is available only for the following device:
• SCALANCE W722-1 RJ-45 (MLFB 6GK5722-1FC00-0AA0 and 6GK5722-1FC00-0AB0
(US version))
4.1

WBM

On the device, you can limit the time available for access with Web Based Management. If
no entry is made for a specific time, the WBM session is closed.
This section describes commands relevant for the configuration of this feature.
4.1.1

The "show" commands

This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
you can execute the "show" commands in every
do [command]
with the "show" command that you want to execute.
[command]
4
91