Show Ip Telnet; Show Ip Dns - Siemens SIMATIC NET Configuration Manual

Network protocols
7.1 IPv4 protocol
7.1.1.4

show ip telnet

Description
This command shows the admin status and the port number of the Telnet server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip telnet
Result
The admin status and the port number of the Telnet server are displayed.
7.1.1.5

show ip dns

Description
This command shows information about the DNS client, for example the status of the DNS
client and parameters for querying the DNS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip dns
Result
Information on the DNS client is displayed.
284
or
cli#
or
cli#
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05