Siemens SIMATIC NET Configuration Manual page 338

Network protocols
7.4 SNMP
Syntax
Call up the command with the following parameters:
snmp filterprofile <profile-name> <OIDTree> [mask<OIDMask>]
The parameters have the following meaning:
Parameter
profile-
name
OIDTree
mask
OIDMask
-
-
Note that the meaning of the filter mask changes depending on the "
parameter:
● ...
● ...
● ...
● ...
Result
The filter is created.
Further notes
You delete a filter with the
You display the created filter with the
338
{included|excluded}[{volatile|nonvolatile}]
Description
Name of the filter profile
Object ID
Keyword for the OID mask
Mask that filters access to the elements of
the MIB tree
Specifies whether the filtered elements are
used or excluded
specifies whether the settings remain fol-
lowing a restart:
... and " " means: Access denied
0 included
... and " " means: Access permitted
0 excluded
... and " " means: Access permitted
1 included
... and " " means: Access denied
1 excluded
no snmp filterprofile
Range of values / note
max. 32 characters
Path information of the MIB tree
-
A series of "
dots in keeping with the path infor-
mation of the MIB tree
•
included
•
excluded
•
volatile
The default settings are used after a
restart
•
nonvolatile
The saved settings are used after a
restart
command.
show snmp filter table
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
" and " " separated by
0 1
(volatile):
(non-volatile):
/
included excluded
command.
"