Wlan Security Ap-Radius-Authenticator Reauth-Interval - Siemens SIMATIC NET Configuration Manual

Industrial wireless lan to ieee 802.11n command line interface

Hide thumbs Also See for SIMATIC NET:

Table of Contents

Security and authentication

wlan security ap-radius-authenticator reauth-interval

With this command, you configure the lifetime of the authentication (in seconds).

This command is available only in access point mode.

● Local time management is active.

You are in the WLAN Configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-wlan)#

Call up the command with the following parameters:

wlan security ap-radius-authenticator reauth-interval <s(60-43200)>

The parameter has the following meaning:

The lifetime is configured.

Further notes

You display the setting with the

You configure the local time management with the

Table of Contents

Scalance w720 Scalance w760