No Alias - Siemens SIMATIC NET Configuration Manual

Configuration
3.1 System
Result
The interface was assigned a name.
Further notes
You delete the name of the interface with the
3.1.10.2

no alias

Description
With this command, you delete the name of the interface.
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameter assignment:
no alias
Result
The name of the interface is removed.
Further notes
You configure the name of the interface with the
60
command.
no alias
command.
alias
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05