Show Ethernetip - Siemens SIMATIC NET Configuration Manual

Result
The following information about the device is displayed:
● MAC address of the device
● Serial Number
● System up time
● System name
● System contact
● System location
● Device Type
● Restart counter
● Config Save mode
● Config Change: This indicates whether or not the current configuration has been saved.
● Login Authentication mode: This indicates whether the authentication is made locally or
on the RADIUS server.
3.1.1.4

show ethernetip

Description
This command shows the current EtherNet/IP configuration.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ethernetip
Result
The current EtherNet/IP configuration is displayed.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
or
cli#
Configuration
3.1 System
37