Security and authentication
10.1 User rights management
With this command, you delete a user.
Default users "admin" and "user" as well as logged in users cannot be deleted.
● The user has been created.
● The user has the right to change device parameters.
● You are in the Global Configuration mode.
The command prompt is as follows:
Call up the command with the following parameters:
no user-account <user-name>
The parameter has the following meaning:
The user has been deleted.
You create a user with the
You show the created users with the
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Range of values / note
Enter a valid user name.
Configuration Manual, 10/2015, C79000-G8976-C351-05