Syntax
Call up the command with the following parameters:
web-session-timeout[seconds(60-3600)]
The parameter has the following meaning:
Parameter
seconds
Result
The time is configured and automatic logout is enabled.
Further notes
You disable automatic logoff with the
You display the current timeout setting with the
4.1.2.2
no web-session-timeout
Description
With this command, you disable the automatic logoff.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no web-session-timeout
Result
Automatic logoff is disabled.
Further notes
You enable automatic logoff with the
You display the current timeout setting with the
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
Description
Time in seconds until automatic logout
after the last entry
no web-session-timeout
web-session-timeout
Functions specific to SCALANCE
Range of values / note
60 ... 3600
Default: 900
command.
show web-session-timeout
command.
show web-session-timeout
4.1 WBM
command.
command.
93