Wlan Amsdu Packet-Size; Wlan Antenna Additional-Attenuation - Siemens SIMATIC NET Configuration Manual

6.1.5.11

wlan amsdu packet-size

Description
With this command, you specify the maximum size of the A-MSDU data packet.
Requirement
● The IEEE 802.11n transmission standard is enabled.
● You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan amsdu packet-size <size (50-200)>
The parameter has the following meaning:
Parameter
size
Result
The size of the A-MSDU data packet is specified.
Further notes
You display the setting with the
6.1.5.12

wlan antenna additional-attenuation

Description
With this command, you specify the additional attenuation caused, for example by an
additional splitter. Using the
WLAN settings violate the permitted transmit power restrictions (
selected country.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
Description
Maximum size of the A-MSDU data pack-
et.
show wlan advanced-11n <wlan 0/X>
command, check whether or not the current
show wlan basic
Network structures
6.1 WLAN
Values or range of values
50...200 bytes
Default: 100 bytes
command.
) of the
TX Power Check
165