Ipcf; The "Show" Commands; Show Wlan Ipcf - Siemens SIMATIC NET Configuration Manual

Functions specific to SCALANCE

4.3 iPCF

4.3 iPCF
This section describes the commands relevant for working with the iPCF function (industrial
Point Coordination Function).
Note
The commands are only available with the following device:
• SCALANCE W722-1 RJ-45 (MLFB 6GK5722-1FC00-0AA0 and 6GK5722-1FC00-0AB0
(US version))
4.3.1

The "show" commands

This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
4.3.1.1

show wlan ipcf

Note
The command is only available with the following device:
• SCALANCE W722-1 RJ-45 (MLFB 6GK5722-1FC00-0AA0 and 6GK5722-1FC00-0AB0
(US version))
Description
This command shows the settings of iPCF.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
100
do [command]
[command]
or
cli#
you can execute the "show" commands in every
with the "show" command that you want to execute.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05