Https Server; The "Show" Commands; Show Ip Http Secure Server Status - Siemens SIMATIC NET Configuration Manual

Network protocols

7.7 HTTPS server

7.7 HTTPS server
This section describes commands of the Hypertext Transfer Protocol Secure (HTTPS).
7.7.1

The "show" commands

This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
7.7.1.1

show ip http secure server status

Description
This command shows the status of the HTTPS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip http secure server status
Result
The status, cipher suite and version of the HTTPS server are displayed.
362
do [command]
[command]
or
cli#
you can execute the "show" commands in every
with the "show" command that you want to execute.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05