Time Dst Date - Siemens SIMATIC NET Configuration Manual

System time
5.1 System time setting
Syntax
Call up the command with the following parameters:
time set hh:mm:ss <day (1-31)>
{january|february|march|april|may|june|july|august|september|october|november|decembe
r}
<year (2000 - 2035)>
The parameters have the following meaning:
Parameter
hh:mm:ss
day
-
year
Result
The system time is set.
Further notes
You display the settings for the system clock with the
5.1.2.3

time dst date

Description
With this command, you configure the start and end of daylight saving time.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
time dst date <name(16> <year (1900-2099)> begin <MMDDhh> end <MMDDhh>
116
Description
Time of day
Day of the month
Month
Year
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Range of values / note
Hour, minute, second each sepa-
rated by ":" no link
1 ... 31
january, february, march, april,
may, june, july, august, septem-
ber, october, november, decem-
ber
2000 ... 2035
command.
show time
Configuration Manual, 10/2015, C79000-G8976-C351-05