Security and authentication
no wlan security context (Client)
With this command, you delete a security context.
This command is only available in the client mode.
The security context 1 cannot be deleted.
You are in the WLAN configuration mode.
The command prompt is as follows:
Call up the command with the following parameters:
no wlan security context <ID (1-8)>
The parameter has the following meaning:
The security context is deleted,
You exit with the
You create a security context and change to the security context configuration mode with the
You display the setting with the
ID of the security context
wlan security context
show wlan security
Range of values / note
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05