Shutdown - Siemens SIMATIC NET Configuration Manual

The parameter has the following meaning:
Parameter
frame-size
At system start or when using the
following defaults apply:
● The size of the MTU is configured to 1500 bytes.
Result
The setting for the size of the MTU is configured.
Further notes
You can shut down the interface with the
You display this setting with the
You display this setting and other information with the
3.1.10.8

shutdown

Description
With this command, you shut down the interface.
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
shutdown complete
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
Description
Size of the MTU in bytes
command with the option
restart
shutdown complete
show interface mtu
Range of values / note
64 ... 1514
or
memory
command.
command.
command.
show interfaces
Configuration
3.1 System
, the
factory
65