Wlan Security Ap-Radius-Authenticator Port-Number - Siemens SIMATIC NET Configuration Manual

Industrial wireless lan to ieee 802.11n command line interface

Hide thumbs Also See for SIMATIC NET:

Table of Contents

wlan security ap-radius-authenticator port-number

With this command, you configure the input port of the RADIUS server.

This command is available only in access point mode.

You are in the WLAN Configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-wlan)#

Call up the command with the following parameters:

wlan security ap-radius-authenticator port-number <index (1-2)> <1-65535>

The parameters have the following meaning:

The input port is configured.

Further notes

You display the setting with the

Table of Contents

Scalance w720 Scalance w760