Show Rmon; Clear Authlog - Siemens SIMATIC NET Configuration Manual

11.1.1.9

show rmon

Description
This command shows the counter reading.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show rmon [statistics [<stats-index (1-65535)>]]
The parameters have the following meaning:
Parameter
statistics
stats-index
If you enter the command without parameters, the display shows whether rmon is enabled or
disabled.
Result
The values entered for the selected statistics index are displayed.
11.1.2

clear authlog

Description
With this command, you delete the content of the logbook.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
or
cli#
Description
Keyword for the rmon statistics to be investigated.
Index number for the statistical values
Diagnostics
11.1 Diagnostics
Range of val-
ues / note
-
1 ... 65535
439