No Static-Lease - Siemens SIMATIC NET Configuration Manual

Result
The assignment is specified.
Further notes
You display the setting with the
You disable the IPv4 address band with the
You delete the assignment with the
7.3.3.11

no static-lease

Note
The command is only available when the following requirements are met:
• SCALANCE W722-1 RJ45 (article no.: 6GK5722-1FC00-0AA0 and 6GK5722-1FC00-
0AB0 (US version))
• SCALANCE W761-1 RJ45 in access point mode (article number): 6GK5761-1FC00-0AA0
and 6GK5761-1FC00-0AB0 (US version))
• The IPv4 address band is not enabled.
Description
With this command, you delete the assignment of an IPv4 address to a MAC address.
Requirement
You are in the DHCPPOOL configuration mode.
The command prompt is as follows:
cli(config-dhcp-pool-<ID>)#
Syntax
Call up the command with the following parameters:
no static-lease { mac <mac-address> | client-id <string> }
The parameter has the following meaning:
Parameter
mac
mac-address
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
show ip dhcp dhcp-server bindings
no pool-enable
no static-lease
Description Range of values / note
Keyword for a MAC -
address
Unicast MAC address Specify the MAC address.
aa:bb:cc:dd:ee:ff
Network protocols
command.
command.
command.
7.3 DHCP server
323