Show Vlan Device Info - Siemens SIMATIC NET Configuration Manual

Syntax
Call up the command with the following parameters:
show vlan[brief|id<vlan-range>|summary]
The parameters have the following meaning:
Parameter
brief
id
vlan-range
summary
If you do not select any parameter from the parameter list, the entries of all available
interfaces are displayed.
Result
The information for the selected VLAN is displayed.
6.2.1.6

show vlan device info

Description
This command shows all the global information that is valid for all VLANs.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show vlan device info
Result
The global information is displayed.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
Description
Shows brief information about all
VLANs
Keyword for a VLAN or VLAN range
Number of the addressed VLAN or
VLAN range
Shows a summary of the VLANs
or
cli#
Network structures
6.2 VLAN
Range of values / note
-
-
1 ... 4094
221