Wlan Frequency Band (Client) - Siemens SIMATIC NET Configuration Manual

Network structures
6.1 WLAN
6.1.5.45

wlan frequency band (client)

Description
With this command, you specify the frequency band for the WLAN interface.
Note
This command is only available in the client mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan frequency band { all | 2.4 | 5 }
The parameters have the following meaning:
Parameters
all
2.4
5
Result
The frequency band for the WLAN interface is specified.
Further notes
You display the setting with the
196
Description
Both frequency bands are used.
Frequency band 2.4 GHz
Frequency band 5.2 (4.9; 5.6; 5.8) GHz
show wlan basic <wlan 0/X>
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Range of values / note
Default settings: WLAN1: 2.4 GHz
command.
Configuration Manual, 10/2015, C79000-G8976-C351-05