Security and authentication
wlan security dot1x username (client)
With this command, you specify the user name for the RADIUS server.
This command is only available in the client mode.
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
Call up the command with the following parameters:
wlan security dot1x username <string>
The parameter has the following meaning:
The user name is specified.
You display the settings with the
Range of values / note
Enter the user name for the RADIUS server. You speci-
fy the corresponding password with the
show wlan security
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05