Clear Logbook; Fault Report Ack - Siemens SIMATIC NET Configuration Manual

Diagnostics
11.1 Diagnostics
Syntax
Call the command without parameters:
clear authlog
Result
The content of the logbook is deleted.
11.1.3

clear logbook

Description
With this command, you delete the content of the logbook.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
clear logbook
Result
The content of the logbook is deleted.
11.1.4

fault report ack

Description
With this command, you acknowledge (delete) the messages of the "Cold/Warm start" event.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
440
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05