Wlan Ipcf-Mc Cycle-Time (Access Point) - Siemens SIMATIC NET Configuration Manual

Functions specific to SCALANCE
4.4 iPCF-MC
4.4.2.3

wlan ipcf-mc cycle-time (access point)

Note
The command is only available with the following device:
• SCALANCE W722-1 RJ-45 (MLFB 6GK5722-1FC00-0AA0 and 6GK5722-1FC00-0AB0
(US version))
Description
With this command, you configure the cycle time for iPCF-MC.
Requirement
You are in the WLAN configuration mode.
The command prompt is as follows:
cli(config-wlan)#
Syntax
Call up the command with the following parameters:
wlan ipcf-mc cycle-time <ms (32-512)>
The parameter has the following meaning:
Parameter
ms
Result
The cycle time is configured.
Further notes
You display the setting with the
106
Description
Cycle time in millisec-
onds (ms)
show wlan ipcf-mc
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Range of values / note
32 ... 512
command.
Configuration Manual, 10/2015, C79000-G8976-C351-05