No Wlan Allowed Channels Only - Siemens SIMATIC NET Configuration Manual

Network structures
6.1 WLAN
6.1.5.3

no wlan allowed channels only

Description
With this command, you disable the "
setting.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call the command without parameter assignment:
no wlan allowed channels only
Result
The function is disabled.
Further notes
You display the setting with the
You enable the function with the
See also
wlan allowed channels only (Page 157)
158
Use allowed channels only
show wlan allowed channels <wlan 0/X>
wlan allowed channels only
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
" function. This is the default
command.
command.