No Vlan - Siemens SIMATIC NET Configuration Manual

Network structures
6.2 VLAN
6.2.2.4

no vlan

Description
With this command, you delete a VLAN on the device.
Requirement
● The VLAN must not be assigned to a physical port.
● You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameter:
no vlan <vlan-id(2-4094)>
Parameter
vlan-id
The VLAN with number 1 cannot be deleted.
Result
The VLAN is deleted
Further notes
With the
You can display information about the VLAN with the
226
Description
Number of the addressed VLAN
command, you create a VLAN on the device.
vlan
Range of values / note
2 ... 4094
show vlan
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
command.