Vap Communication With Own-Vap (Access Point) - Siemens SIMATIC NET Configuration Manual

Industrial wireless lan to ieee 802.11n command line interface

Hide thumbs Also See for SIMATIC NET:

Table of Contents

vap communication with own-vap (access point)

With this command, you specify that the clients logged on to the same SSID of an access

point can communicate with each other.

This command is available only in access point mode.

You are in the Interface Configuration mode of the VAP interface.

The command prompt is as follows:

cli (config-if-vapX-0-Y)#

Call the command without parameter assignment:

vap communication with own-vap

The communication option on the same SSID of an access point is enabled.

Further notes

You display the settings with the

You disable the function with the

Table of Contents

Scalance w720 Scalance w760