Show Wlan Device - Siemens SIMATIC NET Configuration Manual

Result
The configured data transmission speeds for the corresponding WLAN interface are
displayed in the form of a table. The display of the tables depends on the selected frequency
band and the transmission standard.
6.1.1.12

show wlan device

Description
This command shows the WLAN basic configuration for the SCALANCE W700 device, for
example the mode (access point or client).
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show wlan device
Result
The following settings of the SCALANCE W700 device are displayed:
● Country code
● Device mode
● Commit Mode
See also
device mode (Page 152)
commit mode (Page 153)
country (Page 154)
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
or
cli#
Network structures
6.1 WLAN
141