Layer 3 Functions; Nat; The "Show" Commands; Show Nat (Client) - Siemens SIMATIC NET Configuration Manual

Layer 3 functions

9.1

NAT

This section describes commands relevant for NAT / NAPT.
Note
The commands are only available with the following device:
• SCALANCE W722-1 RJ-45 (MLFB 6GK5722-1FC00-0AA0 and 6GK5722-1FC00-0AA0
(US version))
9.1.1

The "show" commands

This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
9.1.1.1

show nat (Client)

Note
This command is only available in the client mode.
Description
This command shows the NAT configuration and the translation list.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
do [command]
[command]
or
cli#
you can execute the "show" commands in every
with the "show" command that you want to execute.
9
371