10.1.3
The "show" commands
This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
10.1.3.1
show user-accounts
Description
This command shows the created users.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show user-accounts
Result
The created users are shown.
10.1.3.2
show users
Description
This command displays the users that logged on via Telnet or SSH.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
you can execute the "show" commands in every
do [command]
with the "show" command that you want to execute.
[command]
Security and authentication
10.1 User rights management
383