No Revision - Siemens SIMATIC NET Configuration Manual

Network structures
6.3 Spanning Tree
Result
The MST region is assigned a revision number.
Further notes
You delete a revision number with the
You display this setting and other information with the
configuration
6.3.5.6

no revision

Description
With this command, you reset the revision number of the MST region to the default value.
The default value is 0.
Requirement
You are in the MSTP Configuration mode.
The command prompt is as follows:
cli(config-mst)#
Syntax
Call the command without parameters:
no revision
Result
The revision number of the MST region is reset to the default value.
Further notes
You assign a revision number to the MST region with the
You display this setting and other information with the
configuration
280
command.
command.
command.
no revision
show spanning tree mst
revision
show spanning tree mst
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
command.