Dhcp Client; The "Show" Commands; Show Ip Dhcp Client Stats; Show Ip Dhcp Client - Siemens SIMATIC NET Configuration Manual

7.2

DHCP client

This section describes commands of the Dynamic Host Configuration Protocol (DHCP).
7.2.1

The "show" commands

This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
7.2.1.1

show ip dhcp client stats

Description
With this command, you display the statistical counters of the DHCP client.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip dhcp client stats
Result
The counters are displayed.
7.2.1.2

show ip dhcp client

Description
With this command, you display the configuration settings of the DHCP client.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
do [command]
[command]
or
cli#
you can execute the "show" commands in every
with the "show" command that you want to execute.
Network protocols
7.2 DHCP client
299