Security and authentication
no vap communication with own-vap (access point)
With this command, you specify that clients logged on to the same SSID of an access point
cannot communicate with each other.
This command is available only in access point mode.
You are in the Interface Configuration mode of the VAP interface.
The command prompt is as follows:
Call the command without parameter assignment:
no vap communication with own-vap
The communication option on the same SSID of an access point is disabled.
You display the settings with the
You enable the function with the
vap communication with own-vap (access point) (Page 425)
show wlan security <vapX 0/Y>
vap communication with own-vap
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05