Show Vlan Learning Params; Show Vlan Port Config - Siemens SIMATIC NET Configuration Manual

Network structures
6.2 VLAN
6.2.1.7

show vlan learning params

Description
This command shows the parameters for the automatic learning of addresses for selected or
all VLANs (active and inactive VLANs).
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show vlan learning params[vlan<vlan-range>]
The parameters have the following meaning:
Parameter
vlan
vlan-range
If you do not select any parameter from the parameter list, the entries of all available
interfaces are displayed.
Result
The settings for the automatic learning of addresses are displayed.
6.2.1.8

show vlan port config

Description
This command shows the VLAN-specific information for ports.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
222
or
cli#
Description
Keyword for a VLAN or VLAN range
Number of the addressed VLAN or
VLAN range
or
cli#
Range of values / note
-
1 ... 4094
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05