no vap broadcast ssid (access point)
With this command, you disable the "Broadcast SSID" function. The SSID is no longer sent
in the frame of the access point. This means that the SSID is not visible for other
SCALANCE W700 devices. Only stations that know the SSID of the access point and that
are configured with it can connect to the access point. The "Any SSID" option must be
disabled on these clients.
This command is available only in access point mode.
You are in the Interface Configuration mode of the VAP interface.
The command prompt is as follows:
Call the command without parameter assignment:
no vap broadcast ssid
The function is disabled.
You display the setting with the
You enable the function with the
vap broadcast ssid (access point) (Page 209)
show wlan vap <vap X 0/Y>
command (default setting).
vap broadcast ssid
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05