Branching To Operating Functions Within An Operating Mode - Siemens Sinumerik 810T User Manual

11.90
2.3.5

Branching to operating functions within an operating mode

Depending on the mode you have selected, you will be offered a "Basic softkey menu" of
operating functions in the menu display (2.1.1.1) on the CRT.
After you select a function using the softkeys, the control will display other/new menus.
"Menu trees" with several branches will be generated.
Menu trees for each operating mode are stored in the control:
You have called up any mode:
Select any function dis-
played with the
appropriate softkey
Hatched areas in the
menus:
the appropriate softkey
has been operated.
Branching of the operating functions ("Menu tree") with stylized representation of the menus
Note :
The detailed branching structure is explained separately for each operating mode in
Sections 2.4.1 to 2.4.9.
© Siemens AG 1990 All Rights Reserved
SINUMERIK 810T, GA3 (BN)
2.3.5 Branching to operating functions within an operating mode
... or extend the menu display with this key to display
further functions (if present).
>
etc.
6ZB5 410-0EP02
2 Operation
etc.
2-43