Region Setting (Labeling)
This item is used to set up the measurement area. It is possible to measure the entire input image, but restricting
the range enables accurate measurement in a short period of time.
Use a rectangle, straight line, circle (ellipse), wide circle, or polygon to specify a measurement region for
[Labeling].
1
In the Item Tab area, click [Region setting].
2
Use the Drawing tools to specify the measurement region.
3
In the figure setting area, specify a region to be measured.
4
Click [OK] in the Figure setting area.
• [OK]: Changes the settings and returns to the previous menu.
• [Cancel]: Changes are discarded. Returns to the previous menu.
• [Apply]: Updates the settings without leaving edit window.
5
If necessary, in the "Display setting" area, set up display settings for the images displayed in
the Image Display area.
For color cameras:
Setting item
Extract image
For monochrome cameras:
Setting item
Binary image
336
Labeling
Set value
[Factory default]
• [Checked]
If you place a check at this option, image set with the color specification
• Unchecked
are displayed.
Set value
[Factory default]
• [Checked]
The image is displayed in binary with black and white.
• Unchecked
Description
Description
FH/FZ5 Processing Item Function Reference Manual