Omron FH-3 Series Reference Manual page 50

3
Specify the camera gain while checking
the image.
Item
• FZ-SC/S/SHC/SH
• FZ-SC2M/S2M/SC5M2/S5M2/SF□/SP□
• FZ-SQ□□□□
Gain
• FH-SC02/SM02/SC04/SM04/SC12/SM12
• FH-SC05R/SM05R
Important
• When an Intelligent Compact Digital camera, FZ-SQ□□□□, is connected, we recommend setting the gain value to 16 for
stable operations. Measurement values may be different if the recommended value is exceeded.
Be sure to thoroughly check the measurement result and set the gain value.
• Due to the specification of its imaging elements, a CMOS camera generates stripe noises when the gain setting of the
camera is raised. You may also find multiple defective pixels, but they do not represent a defect or failure of the product
in any way. If stripe noises and defective pixels affect the measurement results, lower the gain setting of the camera or
use a CCD camera.
48
Camera Image Input FH
Setting value
[Factory default]
0 to 230 [85]
0 to 230 [50]
16 to 64 [16]
0 to 255 [0]
0 to 63 [0]
Description
Adjust the camera gain when the shutter speed, the
lens aperture, and lighting conditions cannot be used
to brighten the image.
Usually, the factory default value can be used.
FH/FZ5 Processing Item Function Reference Manual