Hdr Settings (Camera Image Input Hdr) - Omron FH-3 Series Reference Manual

Important
Do not perform next camera image input processing before STGOUT signal output is completed. STGOUT signal may not
be output.
Perform camera image input processing after STGOUT signal output completion, or set the STEP-camera delay,
STEPSTGOUT delay and STGOUT pulse width so that the electronic flash operates synchronizing with the exposure time.
Note
STGOUT signals are output at each imaging. Therefore, it can be duplicated with the next STGOUT signal output,
depending on the STEP-STGOUT delay or STGOUT width settings.
If it duplicates with the next, the number of times for imaging and electronic flashing can differ.

HDR Settings (Camera Image Input HDR)

Specify the image combination method etc.
1
In the Item Tab area, click [HDR setting].
2
In the "Mode select" area, specify the mode.
When you select the mode in the "Mode select" area and specify the measurement region on the image,
the parameters are set automatically. To finely adjust the parameters, refer to the next items.
Item
[Factory default]
[HDR mode]
Mode
select
High contrast mode
76
Camera Image Input HDR
Set value
In halation is likely generated image, select this mode if you want to stabilize the
brightness.
Generate images with stable brightness by shooting multiple images with different
shutter speeds based on the set Bright range.
Select this mode if you want to generate image with good contrast.
Generate images with good contrast by shooting multiple images with different
shutter speeds based on the set Average and Width.
Description
FH/FZ5 Processing Item Function Reference Manual