Omron FH-3 Series Reference Manual page 53

Binning Settings (for Monochrome Cameras Only)
Binning is a function for obtaining a single value by adding multiple lines together.
Some cameras give the effect of a higher frame rate by raising the sensitivity of the brightness virtually by adding
together and decreasing the amount of data to be transferred.
Important
• The effects that can be obtained with different cameras are as follows.
Monochrome FZ Camera
Monochrome FH Camera (Excluding FH-SM05R)
FH-SM05R
1
In the Item Tab area, click [Camera setting].
In the "Binning settings" area, select either "1 line" or "2 lines".
Item
Binning setting
Number of lines to be read
By narrowing the image range to be loaded, the image
scan time can be shortened.
Set the range taking the offset of the measurement
object into consideration.
The part of the image narrowed down by the start line
and the end line will be displayed in the Image Display
area of the processing item setting window or the Main
screen.
Note
About minimum number of lines
• With the FH-SM/FH-SMR, the minimum number of lines (minimum value between the start and end lines) is 4
line.
• With the FH-SC/FH-SCR, the minimum number of lines is 4 lines.
• With the FZ-S excluding the FZ-SQ series, the minimum number of lines is 12 lines.
• With the FZ-SQ series, the minimum number of lines is 8 lines.
About coordinate values
• The coordinate values displayed as the measurement results are the values of the display position on the monitor.
• The coordinate values do not vary according to the settings for "Number of lines to be read".
1
In the Item Tab area, click [Camera
setting].
FH/FZ5 Processing Item Function Reference Manual
Camera model
Setting value
[Factory default]
[1 line] Data is transferred line by line.
Data is transferred two lines at a time.
Each image is scanned skipping one scan line per two consecutive
2 lines
lines. Measurement precision is decreased because the image
resolution in the vertical direction is lower.
Brightness Sensitivity
Effective Effective
Effective No effect
No effect Effective
Description
Frame rate
Start line
Range of image to be
loaded
End line
51
Camera Image Input FH
1