Setting Thresholds - Omron Z4LB V2 Instruction Manual

Setting Thresholds

3-2 Setting Thresholds
Example
HIGH threshold
LOW threshold
Note The discrimination outputs can be changed. Refer to 4-2-2 Se-
Example
26
Set the thresholds for good/improper product discrimination.
No cap
Measured value
(Incident)
Normal
Cap rise
lecting the Discrimination Outputs for details (p. 39).
There are three methods to set thresholds. Select the most con-
venient method according to the application.
1 Direct Settings: The thresholds are set directly.
2 Teaching Settings: The thresholds are set based on a refer-
ence workpiece.
Measured value: 4 V
Measured value > HIGH threshold:
Improper product
LOW threshold < Measured value <
HIGH threshold: Good product
Measured value < HIGH threshold:
Improper product
The LOW threshold is set.
The HIGH threshold is set.
Section 3-2