Omron FH-3 Series Reference Manual page 571

2 images operation filter setting screen
1
Select the filter whose settings you want to change in the list in the filter setting list area.
2
Click [Edit].
The filter edit screen appears.
3
Specify a value for each item in the filter edit screen.
Setting items for filters other than 2 images operation
Setting item
Target
Other unit image
Other unit image
number
Filtered image
FH/FZ5 Processing Item Function Reference Manual
Setting value
[Factory default]
Set the image that is filtered in "Target".
• Measurement image
Filters the measurement image for the processing unit.
• Measurement
• Pre filter image
image
Filters the previously processed image.
• [Pre filter image]
• Other unit image
• Other unit image
Filters a processing unit image held by another processing unit.
• Filtered image
• Filtered image
Filters the filtered image of the specified filter number in the filter setting
list.
This can be set when "Other unit image" is selected for "Target".
Set the processing unit that holds the image used as the target image. A
• [None]
processing unit of an image input processing item or image conversion
• 0 to 9,999
processing item can be selected. If the selected processing unit does not
hold an image, invalid image occurs and a black image is displayed.
This can be set when "Other unit image" is selected for "Target".
Set the image number of the image that is used as the target image. If the
0 to 3 [0]
processing unit does not hold the image of the set image number, invalid
image occurs and a black image is displayed.
This can be set when "Filtered image" is selected for "Target".
• [None] Set the processing unit that holds the image used as the target image. A
• 0 to 14 processing unit that performed processing prior to the current processing
unit can be selected.
Description
Advanced Filter
3
569