Omron FH-3 Series Reference Manual page 880

Setting item
• Solid line
Style
• Dashed line
Width 1 to 10
OK Color
NG Color
Color
Judgement
Arbitrary color
Display cross line
Setting item
Scale display -
• [Calibration]
Unit
• Pixels
0.0000 to 9999.9999
Interval
[50.0000]
0.0000 to 9999.9999
Line length
[10.0000]
When Display String, Value, Item name, Judge, Date or Display Unit string Is Selected
Sets display position, size, and color etc. of characters.
Common settings
Setting item
Figure (or Numerical)
Display
position
Operation
Detail
Setting item
• Top
• Bottom
Align • Left
• Center
• Right
Size 10 to 200
Angle 0 to 359
878
Result Display
Setting item
Select the line type.
Modify the line width.
Displayed in green.
Displayed in red.
Displayed using OK color or NG color based on the judgment results. Specify
measurement values subject to judgment and set up respective judgment
conditions.
Displayed using specified color. Methods for specifying color include
specifying by clicking on a color chart and specifying RGB values.
Setting item
Place a check to show the scale.
Select the unit used when grids are displayed.
Set the intervals of the scale on the grids.
Set the length of the scale line on the grids.
Setting item
Select this if you would like the figure to always display in the same location.
Methods include specifying by clicking on the window and specifying
coordinate values.
However, if you would like to always display the figure in a reference position,
set an expression using "Operation".
Select this when you would like to change display position for each
measurement based on the measured value. Set up the expression to
specify the display position.
Setting item
Specify the alignment of the text.
Specify the font size.
Specify the display angle.
Description
Description
Description
Description
FH/FZ5 Processing Item Function Reference Manual