Setting The Region - Omron ZFX-C10 User Manual

Setting the Region

Moving and resizing regions
Size
Size button
Move
Combining multiple shapes
Depending on the measurement item, up to five shapes can be combined to set a measurement region.
Combining various shapes in this way allows you to draw complex shape regions or exclude unwanted parts
from the measurement region.
Item
OR
NOT
Example:
The gray part is
the measurement
region.
178
Basic Knowledge for Operation
<Moving regions>
Touch pen operation
Move [130,140]
Tap any point in the screen and drag the touch pen in this state.
The region moves by the amount that the touch pen is dragged
(X, Y).
Key operation
Apply Cancel
Move button
(Holding the keys down moves the region at high speed.)
Size [130,140]
<Resizing regions>
Touch pen operation
Tap any point in the screen and drag the touch pen in this state.
The region is resized (enlarged or reduced) by the amount that
the touch pen is dragged (X, Y).
Apply Cancel
Also, you can drag somewhere else on screen to set a region on
top of [Cancel] or other buttons at the bottom of the screen, and
resize the region.
Key operation
↓ DOWN key/→ R key: Enlarges a region.
↑ UP key/← L key: Reduces a region.
(Holding the keys down moves the region at high speed.)
Description
When drawing a complex shape, register a combination of shapes as a single region.
This item is used for excluding part of a region.
Shape 1: OR region
Shape 2: NOT region
Shape 3: OR region
↑ UP key: Moves the region upwards.
↓ DOWN key: Moves the region downward.
→ R key: Moves the region to the right.
← L key: Moves the region to the left.
ZFX-C User's Manual