Statistics
To reduce measurement variation of a given measurement processing item, multiple measurement results are
stored in the processing item and statistical processing is performed at a specified timing. Up to 8 data can be
set for statistical processing per processing item.
Used in the Following Case
• When you want to use an average of multiple measurement results as the measurement value
because the work is vibrating
Settings Flow (Statistics)
Set up statistical processing according to the following flow.
Make sure to set
Start
Data Setting (Statistics)
Settings complete
Test measurement
List of Statistics Items
Item name
Statistical
Set the number of data to be stored as well as processing timing.
Reference: Statistical Parameters (Statistics) (p.702)
parameter
Set the data to be processed using a calculation formula.
Data setting
Reference: Data Setting (Statistics) (p.703)
Set up for checking of stored data using a graph.
Data display
Reference: Data Display (Statistics) (p.703)
Output
This item can be changed if necessary. Normally, the factory default value will be used.
Reference: Output Parameters (Statistics) (p.704)
parameter
FH/FZ5 Processing Item Function Reference Manual
Set as necessary.
Statistical Parameter (Statistics)
Data Display (Statistics)
Output Parameters (Statistics)
Check results/make adjustments
Description
4
701
Statistics