Omron FH-3 Series Reference Manual page 437

No. Data name
130 QR code ECC level
131 Timeout
133 Character output flag
134 Output range specify
135 Output ending digit
136 Output starting digit
137 Output device
138 Error character output flag
Message output while outputting
139
an error
140 Automatic code length setting
141 Error code output flag
142 Magnify level
143 Magnify level auto
144 Quiet zone
145 Integrated quality
146 Read mode
147 MicroQR size
148 ECC level
Upper limit of number of
170
characters detected
Lower limit of number of
171
characters detected
Judgement comparison character
172
string
Flag used for special character
173
judgement
Flag used for special character
174
classification
FH/FZ5 Processing Item Function Reference Manual
Set/Get
0: Automatic
1: M
Set/Get 2: L
3: H
4: Q
Set/Get 50 to 99999 ms
0: Not output
Set/Get
1 : Output
0: Not set
Set/Get
1: Set
Set/Get 1 to 652
Set/Get 1 to 652
0: RS-232C/422
Set/Get
1: Ethernet
0: Not output
Set/Get
1: Output
Set/Get Output character string when error occurred
1: Automatic
Set/Get
0: The specified code length is applied.
0: Not output
Set/Get
1: Output
Set/Get 0 to 4
0: Use the Magnify level specified value.
Set/Get
1: Auto
0: OFF
Set/Get
1: ON
Set/Get 0 to 4
0: Normal
Set/Get
1: DPM
0: Auto
1: 11 × 11
Set/Get 2: 13 × 13
3: 15 × 15
4: 17 × 17
0: Auto
1: L
Set/Get
2: M
3: Q
Set/Get 0 to 652
Set/Get 0 to 652
Set/Get Comparison string used for judgement
0: "*" and "?" are considered to be wild cards.
Set/Get
1: "*" and "?" are considered to be character strings.
0: "*" and "?" are considered to be wild cards.
Set/Get
1: "*" and "?" are considered to be character strings.
Data range
2D Code
2
435