Table of Contents
Advertisement
Auto setting
Reverse
Region Setting (Labeling)
This item is used to set up the measurement area.It is possible to measure the entire input image, but
restricting the range enables accurate measurement in a short period of time.
Use a rectangle, straight line, circle (ellipse), wide circle, or polygon to specify a measurement region for
[Labeling].
1.
In the Item Tab area, tap [Region setting].
2.
Use the Drawing tools to specify the measurement region.
3.
In the figure setting area, specify a region to be measured.
4.
In the figure setting area, tap [OK].
The measurement region is registered and displayed in the Image Display area.
5.
If necessary, in the "Display setting" area, set up display settings for the images displayed in the
Image Display area.
For color cameras:
Setting item
Extracted
●
image
●
FZ3 Processing Items List Manual
—
[Checked]
●
Unchecked
●
Set value
[Factory default]
[Checked]
If you place a check at this option, images set with color
Unchecked
specification are displayed.
Optimum binary levels are calculated
automatically and set.
This item reverses black and white colors.
Description
Labeling
177
2
Advertisement
Table of Contents
