Omron FH-3 Series Reference Manual page 79

3
In the "Image input setting" area, set the items.
A brightness histogram is displayed as the graph.
HDR
Set value
Item
[Factory default]
Min Bright 0 to 20
range [8]
Max Bright 0 to 20
range [14]
• [Unchecked]
• Checked
Input num set
2 to 16
[6]
0.00 to 20.00
Average
[11.00]
0.01 to 1.00
Width
[1.00]
• [Unchecked]
• Checked
Input num set
2 to 16
[6]
4
In the "Output setting" area, set the combination method.
Set value
Item
[Factory default]
[Normal]
Color
Combine type
Linear
The current shot count and image combination time for the settings are displayed.
FH/FZ5 Processing Item Function Reference Manual
High contrast mode
This item sets the minimum brightness for combining images.
This item sets the maximum brightness for combining images.
Place a check to set the number of shots manually.
Setting a high shot count provides images with low noise. However, more
processing time is required.
Setting a low shot count shortens the processing time. However, the image is
more easily affected by noise.
Specify the average brightness for images shot.
Specify the brightness range for images shot.
Place a check to set the number of shots manually.
Setting a high shot count provides images with low noise. However, more
processing time is required.
Setting a low shot count shortens the processing time. However, the image is
more easily affected by noise.
Select the combination method.
Normal: Standard combination method This compensates the brightness so that
dark sections on the combination image do not become all black.
Color: This is suitable for inspecting labeling and the Gravity and Area. This
compensates the saturation when there is little hue information in the combined
image.
Linear: This is suitable for fine matching and defect inspection. In order to output
the actual brightness of the workpiece, no compensation is performed.
Description
Description
Camera Image Input HDR
1
77