Output Image Settings (Advanced Filter); Measurement Results For Which Output Is Possible (Advanced Filter) - Omron FH-3 Series Reference Manual

Output Image Settings (Advanced Filter)

You can change the output image settings.
These settings specify the image that is output as the measurement result. The image set as the output image
can be used as the measurement image on other processing units of the measurement flow.
Setting item
[Factory default]
Output image 0 • Enabled (fixed)
• [Disabled]
Output images 1 to 3
• Enabled
Output filters 1 to 3 • Filter number
• [Output image 0]
• Output image 1
Set measure image
• Output image 2
• Output image 3

Measurement Results for Which Output Is Possible (Advanced Filter)

The measurement results provided by advanced filter are shown below. The measurement results appear in the
"Detail Result" area, and you can also use result output processing items to output the measurement results to
an external device.
Refer to the "External Reference Tables" for the parameters that can be referenced, including measurement
results.
(Reference: External Reference Table (Advanced Filter) (p.606))
FH/FZ5 Processing Item Function Reference Manual
Setting value
As the final image, set the image to which all added filters have been applied.
Select to output an image filtered by a specific filter.
This can be set when one of the Output images 1 to 3 checkboxes is
selected.
Set the number of the filter used to filter the output image.
From the output images, select the image to be used as the advanced filter
image.
The image specified with this setting can be used as the measurement image
for measurement in processing units that follow the current processing unit.
Description
Advanced Filter
3
603